Supermicro SSE-G2252 User Manual page 215

Configuration Settings for MSTP
• Max Instance Numbers – The maximum number of MSTP instances to which this
switch can be assigned.
• Configuration Digest – An MD5 signature key that contains the VLAN ID to MST
ID mapping table. In other words, this key is a mapping of all VLANs to the CIST.
• Region Revision
• Region Name
switch's MAC address)
• Max Hop Count – The maximum number of hops allowed in the MST region before
a BPDU is discarded. (Range: 1-40; Default: 20)
NOTE: Region Revision and Region Name and are both required to uniquely
identify an MST region.
Web Interface
To configure global STA settings:
1. Click S
PANNING
2. Select C
ONFIGURE
3. Select C
ONFIGURE
4. Modify any of the required attributes. Note that the parameters displayed for the
spanning tree types (STP, RSTP, MSTP) varies as described in the preceding
section.
5. Click A
PPLY
2. The MST name and revision number are both required to uniquely identify an
MST region.
2
– The revision for this MSTI. (Range: 0-65535; Default: 0)
2
– The name for this MSTI. (Maximum length: 32 characters;
T > STA.
REE
G from the Step list.
LOBAL
from the Action list.
Chapter 9: Spanning Tree Algorithm
9-9