Alias - Supermicro SSE-G2252 User Manual

Example
To specify port 4, enter the following command:
SSE-G2252(config)#interface ethernet 1/4
SSE-G2252(config-if)#

alias

This command configures an alias name for the interface. Use the no form to remove
the alias name.
Syntax
alias string
no alias
string - A mnemonic name to help you remember what is attached to this interface.
(Range: 1-64 characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The alias is displayed in the running-configuration file. An example of the value which a
network manager might store in this object for a WAN interface is the (Telco's) circuit
number/identifier of the interface.
Example
The following example adds an alias to port 4.
SSE-G2252(config)#interface ethernet 1/4
SSE-G2252(config-if)#alias finance
SSE-G2252(config-if)#
Chapter 27: Interface Commands
27-3