SSE-G2252/SSE-G2252P Switches User's Manual
ip igmp snooping version
This command configures the IGMP snooping version. Use the no form to restore the
default.
Syntax
ip igmp snooping [vlan vlan-id] version {1 | 2 | 3}
no ip igmp snooping version
vlan-id - VLAN ID (Range: 1-4093)
1 - IGMP Version 1
2 - IGMP Version 2
3 - IGMP Version 3
Default Setting
Global: IGMP Version 2
VLAN: Not configured, based on global setting
Command Mode
Global Configuration
Command Usage
•
This command configures the IGMP report/query version used by IGMP snooping.
Versions 1 - 3 are all supported, and versions 2 and 3 are backward compatible, so
the switch can operate with other devices, regardless of the snooping version
employed.
•
If the IGMP snooping version is configured on a VLAN, this setting takes
precedence over the global configuration.
Example
The following configures the global setting for IGMP snooping to version 1.
SSE-G2252(config)#ip igmp snooping version 1
SSE-G2252(config)#
38-12