Ip Name-Server - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual

ip name-server

This command specifies the address of one or more domain name servers to use for
name-to-address resolution. Use the no form to remove a name server from this list.
Syntax
[no] ip name-server server-address1 [server-address2 ...
server-address6]
server-address1 - IP address of domain-name server.
server-address2 ... server-address6 - IP address of additional domain-name
servers.
Default Setting
None
Command Mode
Global Configuration
Command Usage
The listed name servers are queried in the specified sequence until a response is
received, or the end of the list is reached with no response.
Example
This example adds two domain-name servers to the list and then displays the list.
SSE-G2252(config)#ip name-server 192.168.1.55 10.1.0.55
SSE-G2252(config)#end
SSE-G2252#show dns
Domain Lookup Status:
DNS disabled
Default Domain Name:
sample.com
Domain Name List:
sample.com.jp
sample.com.uk
Name Server List:
192.168.1.55
10.1.0.55
SSE-G2252#
Related Commands
"ip domain-name" on page 40-4
"ip domain-lookup" on page 40-3
40-6