Supermicro SSE-G2252 User Manual page 768

SSE-G2252/SSE-G2252P Switches User's Manual
destination-ipv6-address - An IPv6 destination address or network class. The
address must be formatted according to RFC 2373 "IPv6 Addressing Architecture,"
using 8 colon-separated 16-bit hexadecimal values. One double colon may be used
in the address to indicate the appropriate number of zeros required to fill the
undefined fields. (The switch only checks the first 64 bits of the destination address.)
prefix-length - A decimal value indicating how many contiguous bits (from the left) of
the address comprise the prefix; i.e., the network portion of the address. (Range:
0-128 for source prefix, 0-8 for destination prefix)
dscp – DSCP traffic class. (Range: 0-63)
next-header – Identifies the type of header immediately following the IPv6 header.
(Range: 0-255)
time-range-name - Name of the time range.
(Range: 1-30 characters)
Default Setting
None
Command Mode
Extended IPv6 ACL
Command Usage
• All new rules are appended to the end of the list.
• Optional internet-layer information is encoded in separate headers that may be
placed between the IPv6 header and the upper-layer header in a packet. There are
a small number of such extension headers, each identified by a distinct Next Header
value. IPv6 supports the values defined for the IPv4 Protocol field in RFC 1700,
including these commonly used headers:
0
6
17
43
44
51
50
60
Example
This example accepts any incoming packets if the destination address is
2009:DB9:2229::79/8.
: Hop-by-Hop Options
: TCP Upper-layer Header
: UDP Upper-layer Header
: Routing
: Fragment
: Authentication
: Encapsulating Security Payload
: Destination Options
26-14
(RFC 2460)
(RFC 1700)
(RFC 1700)
(RFC 2460)
(RFC 2460)
(RFC 2402)
(RFC 2406)
(RFC 2460)