show mac access-group
This command shows the ports assigned to MAC ACLs.
Command Mode
Privileged Exec
Example
SSE-G2252#show mac access-group
Interface ethernet 1/5
MAC access-list M5 in
SSE-G2252#
Related Commands
mac access-group
show mac access-list
This command displays the rules for configured MAC ACLs.
Syntax
show mac access-list [acl-name]
acl-name – Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Example
SSE-G2252#show mac access-list
MAC access-list jerry:
permit any 00-e0-29-94-34-de ethertype 0800
SSE-G2252#
Related Commands
"permit, deny, redirect-to (MAC ACL)" on page 26-19
"mac access-group" on page 26-22
26-4 ARP ACLs
The commands in this section configure ACLs based on the IP or MAC address
contained in ARP request and reply messages. To configure ARP ACLs, first create an
access list containing the required permit or deny rules, and then bind the access list to
one or more VLANs using the
ip arp inspection vlan
26-23
Chapter 26: Access Control Lists
command
(page
25-48).