SSE-G2252/SSE-G2252P Switches User's Manual
spanning-tree priority
This command configures the spanning tree priority globally for this switch. Use the no
form to restore the default.
Syntax
spanning-tree priority priority
no spanning-tree priority
priority - Priority of the bridge. (Range – 0-61440, in steps of 4096; Options: 0, 4096,
8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152,
53248, 57344, 61440)
Default Setting
32768
Command Mode
Global Configuration
Command Usage
Bridge priority is used in selecting the root device, root port, and designated port. The
device with the highest priority (i.e., lower numeric value) becomes the STA root device.
However, if all devices have the same priority, the device with the lowest MAC address
will then become the root device.
Example
SSE-G2252(config)#spanning-tree priority 40000
SSE-G2252(config)#
34-8