Show Mac-Address-Table Aging-Time - Supermicro SSE-G2252 User Manual

Command Usage
• The MAC Address Table contains the MAC addresses associated with each
interface. Note that the Type field may include the following types:
• Learn - Dynamic address entries
• Config - Static entry
• The mask should be hexadecimal numbers (representing an equivalent bit mask) in
the form xx-xx-xx-xx-xx-xx that is applied to the specified MAC address. Enter
hexadecimal numbers, where an equivalent binary bit "0" means to match a bit and
"1" means to ignore a bit. For example, a mask of 00-00-00-00-00-00 means an
exact match, and a mask of FF-FF-FF-FF-FF-FF means "any."
• The maximum number of address entries is 8K.
Example
SSE-G2252#show mac-address-table
Interface MAC Address
--------- ----------------- ---- -------- -----------------
Eth 1/ 1 00-E0-29-94-34-DE
Eth 1/21 00-01-EC-F8-D8-D9
SSE-G2252#

show mac-address-table aging-time

This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
SSE-G2252#show mac-address-table aging-time
Aging Status : Enabled
Aging Time: 300 sec.
SSE-G2252#
Chapter 33: Address Table Commands
VLAN Type Life Time
1 Config Delete on Reset
1 Learn Delete on Timeout
33-5