Supermicro SSE-G2252 User Manual page 329

• Source IPv6 Address – An IPv6 source address or network class. The address
must be formatted according to RFC 2373 "IPv6 Addressing Architecture," using 8
colon-separated 16-bit hexadecimal values. One double colon may be used in the
address to indicate the appropriate number of zeros required to fill the undefined
fields.
• Source Prefix-Length – A decimal value indicating how many contiguous bits (from
the left) of the address comprise the prefix (i.e., the network portion of the address).
(Range: 0-128 bits)
• Time Range – Name of a time range.
Web Interface
To add rules to a Standard IPv6 ACL:
1. Click S
ECURITY
2. Select C
ONFIGURE
3. Select A R
DD ULE
4. Select IP 6 S
V TANDARD
5. Select the name of an ACL from the Name list.
6. Specify the action (i.e., P
7. Select the source address type (A
8. If you select "H
subnet address and the prefix length.
9. Click A .
PPLY
Figure 14-40. Configuring a Standard IPv6 ACL
> ACL.
ACL from the Step list.
from the Action list.
from the Type list.
or D
ERMIT
NY
," enter a specific address. If you select "IP
OST
Chapter 14: Security Measures
).
ENY
, H , or IP 6-
OST V PREFIX
14-51
).
6- ," enter a
V PREFIX