Configuring Vlan Interfaces - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual
NOTE: The switch allows 256 user-manageable VLANs.
Example
The following example adds a VLAN, using VLAN ID 105 and name RD5. The VLAN is
activated by default.
SSE-G2252(config)#vlan database
SSE-G2252(config-vlan)#vlan 105 name RD5 media ethernet
SSE-G2252(config-vlan)#
Related Commands
"show vlan" on page 35-18

35-3 Configuring VLAN Interfaces

Table 35-4. Commands for Configuring VLAN Interfaces
Command
interface vlan
switchport
acceptable-frame-types
switchport allowed vlan
switchport forbidden vlan
switchport gvrp
switchport ingress-filtering
switchport mode
switchport native vlan
switchport priority default
vlan-trunking
Function
Enters interface configuration mode for a specified VLAN IC
Configures frame types to be accepted by an interface
Configures the VLANs associated with an interface
Configures forbidden VLANs for an interface
Enables GVRP for an interface
Enables ingress filtering on an interface
Configures VLAN membership mode for an interface
Configures the PVID (native VLAN) of an interface
Sets a port priority for incoming untagged frames
Allows unknown VLANs to cross the switch
35-10
Mode
IC
IC
IC
IC
IC
IC
IC
IC
IC