Igmp Filtering And Throttling - Supermicro SSE-G2252 User Manual

38-3 IGMP Filtering and Throttling

In certain switch applications, the administrator may want to control the multicast
services that are available to end users. For example, an IP/TV service based on a
specific subscription plan. The IGMP filtering feature fulfills this requirement by
restricting access to specified multicast services on a switch port, and IGMP throttling
limits the number of simultaneous multicast groups a port can join.
Table 38-4. IGMP Filtering and Throttling Commands
Command
ip igmp filter (Global
Configuration)
ip igmp profile
permit, deny
range
ip igmp filter (Interface
Configuration)
ip igmp max-groups
ip igmp max-groups action
show ip igmp filter
show ip igmp profile
show ip igmp throttle interface
Chapter 38: Multicast Filtering Commands
Function
Enables IGMP filtering and throttling on the switch
Sets a profile number and enters IGMP filter profile
configuration mode
Sets a profile access mode to permit or deny
Specifies one or a range of multicast addresses for a
profile
Assigns an IGMP filter profile to an interface
Specifies an IGMP throttling number for an interface
Sets the IGMP throttling action for an interface
Displays the IGMP filtering status
Displays IGMP profiles and settings
Displays the IGMP throttling setting for interfaces
38-27
Mode
GC
GC
IPC
IPC
IC
IC
IC
PE
PE
PE