Show Lacp - Supermicro SSE-G2252 User Manual

show lacp

This command displays LACP information.
Syntax
show lacp [port-channel] {counters | internal | neighbors | sys-id}
port-channel - Local identifier for a link aggregation group. (Range: 1-12)
counters - Statistics for LACP protocol messages.
internal - Configuration settings and operational state for local side.
neighbors - Configuration settings and operational state for remote side.
sys-id - Summary of system priority and MAC address for all channel groups.
Default Setting
Port Channel: all
Command Mode
Privileged Exec
Example
SSE-G2252#show lacp 1 counters
Port Channel: 1
---------------------------------------------------------------
Eth 1/ 2
---------------------------------------------------------------
LACPDUs Sent
LACPDUs Received
Marker Sent
Marker Received
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
.
.
.
Chapter 28: Link Aggregation Commands
: 12
: 6
: 0
: 0
28-9