Supermicro SSE-G2252 User Manual page 817

Table 28-3. show lacp internal - Display Description
Field
Oper Key
Admin Key
LACPDUs Internal
LACP System Priority LACP system priority assigned to this port channel.
LACP Port Priority
Admin State,
Oper State
Description
Current operational value of the key for the aggregation port.
Current administrative value of the key for the aggregation port.
Number of seconds before invalidating received LACPDU information.
LACP port priority assigned to this interface within the channel group.
Administrative or operational values of the actor's state parameters:
Expired – The actor's receive machine is in the expired state;
Defaulted – The actor's receive machine is using defaulted operational partner
information, administratively configured for the partner.
Distributing – If false, distribution of outgoing frames on this link is disabled; i.e.,
distribution is currently disabled and is not expected to be enabled in the
absence of administrative changes or changes in received protocol information.
Collecting – Collection of incoming frames on this link is enabled; i.e., collection
is currently enabled and is not expected to be disabled in the absence of
administrative changes or changes in received protocol information.
Synchronization – The System considers this link to be IN_SYNC; i.e., it has
been allocated to the correct Link Aggregation Group, the group has been
associated with a compatible Aggregator, and the identity of the Link
Aggregation Group is consistent with the System ID and operational Key
information transmitted.
Aggregation – The system considers this link to be aggregatable; i.e., a potential
candidate for aggregation.
Long timeout – Periodic transmission of LACPDUs uses a slow transmission
rate.
LACP-Activity – Activity control value with regard to this link.
(0: Passive; 1: Active)
Chapter 28: Link Aggregation Commands
28-11