Show Port Monitor - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual

show port monitor

This command displays mirror information.
Syntax
show port monitor [interface | vlan vlan-id | mac-address mac-address]
interface - ethernet unit/port (source port)
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
vlan-id - VLAN ID (Range: 1-4093)
mac-address - MAC address in the form of xx-xx-xx-xx-xx-xx or xxxxxxxxxxxx.
Default Setting
Shows all sessions.
Command Mode
Privileged Exec
Command Usage
This command displays the currently configured source port, destination port, and mirror
mode (i.e., RX, TX, RX/TX).
Example
The following shows mirroring configured from port 6 to port 11:
SSE-G2252(config)#interface ethernet 1/11
SSE-G2252(config-if)#port monitor ethernet 1/6
SSE-G2252(config-if)#end
SSE-G2252#show port monitor
Port Mirroring
-------------------------------------
Destination Port (listen port): Eth1/11
Source Port (monitored port)
Mode
SSE-G2252#
: Eth1/ 6
:RX/TX
30-4