Address Table Commands
These commands are used to configure the address table for filtering specified
addresses, displaying current entries, clearing the table, or setting the aging time.
Command
mac-address-table aging-time
mac-address-table static
clear mac-address-table dynamic
show mac-address-table
show mac-address-table
aging-time
show mac-address-table count
Chapter 33
Table 33-1. Address Table Commands
Function
Sets the aging time of the address table
Maps a static address to a port in a VLAN
Removes any learned entries from the forwarding
database
Displays entries in the bridge-forwarding database
Shows the aging time for the address table
Shows the number of MAC addresses used and the
number of available MAC addresses
Chapter 33: Address Table Commands
33-1
Mode
GC
GC
PE
PE
PE
PE