show ip igmp snooping
This command shows the IGMP snooping, proxy, and query configuration settings.
Command Mode
Privileged Exec
Command Usage
This command displays global and VLAN-specific IGMP configuration settings. See
"Configuring IGMP Snooping and Query Parameters" on page 18-4
the displayed items.
Example
The following shows the current IGMP snooping configuration:
SSE-G2252#show ip igmp snooping
IGMP snooping
Router port expire time
Router alert check
TCN flood
TCN query solicit
Unregistered data flood
Unsolicited report interval
Version exclusive
Version
Proxy reporting
Vlan 1:
--------
IGMP snooping
IGMP snooping running status
Version
Version exclusive
Immediate leave
Last member query interval
Last member query count
Proxy query address
General query suppression
Query interval
Query response interval
Proxy reporting
Multicast Router Discovery
.
.
.
Chapter 38: Multicast Filtering Commands
: Enabled
: 300 s
: Disabled
: Disabled
: Disabled
: Disabled
: 400 s
: Disabled
: 2
: Enabled
: Enabled
: Inactive
: Using global version (2)
: Using global status (Disabled)
: Disabled
: 10 (1/10s)
: 2
: 0.0.0.0
: Disabled
: 125 s
: 100 (1/10s)
: Using global status (Enabled)
: Enabled
38-23
for a description of