ip igmp snooping unsolicited-report-interval
This command specifies how often the upstream interface should transmit unsolicited
IGMP reports when proxy reporting is enabled. Use the no form to restore the default
value.
Syntax
ip igmp snooping unsolicited-report-interval seconds
no ip igmp snooping version-exclusive
seconds - The interval at which to issue unsolicited reports. (Range: 1-65535
seconds)
Default Setting
400 seconds
Command Mode
Global Configuration
Command Usage
•
When a new upstream interface (that is, uplink port) starts up, the switch sends
unsolicited reports for all currently learned multicast channels out through the new
upstream interface.
•
This command only applies when proxy reporting is enabled (see
proxy-reporting" on page
Example
SSE-G2252(config)#ip igmp snooping unsolicited-report-interval 5
SSE-G2252(config)#
Chapter 38: Multicast Filtering Commands
38-4).
38-11
"ip igmp snooping