SSE-G2252/SSE-G2252P Switches User's Manual
lldp med-location civic-addr
This command configures an LLDP-MED-enabled port to advertise its location
identification details. Use the no form to restore the default settings.
Syntax
lldp med-location civic-addr [[country country-code] | [what device-type] |
[ca-type ca-value]]
no lldp med-location civic-addr [[country] | [what] | [ca-type]]
country-code – The two-letter ISO 3166 country code in capital ASCII letters.
(Example: DK, DE or US)
device-type – The type of device to which the location applies.
0 – Location of DHCP server.
1 – Location of network element closest to client.
2 – Location of client.
ca-type – A one-octet descriptor of the data civic address value. (Range: 0-255)
ca-value – Description of a location. (Range: 1-32 characters)
Default Setting
Not advertised
No description
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
•
Use this command without any keywords to advertise location identification details.
•
Use the ca-type to advertise the physical location of the device, that is the city, street
number, building and room information. The address location is specified as a type
and value pair, with the civic address (CA) type being defined in RFC 4776. The
following table describes some of the CA type numbers and provides examples.
CA Type
Description
1
National subdivisions (state, canton, province)
2
County, parish
3
City, township
4
City division, borough, city district
Table 39-2. LLDP MED Location CA Types
39-16
CA Value Example
California
Orange
Irvine
West Irvine