Supermicro SSE-G2252 User Manual page 198

SSE-G2252/SSE-G2252P Switches User's Manual
Parameters
These parameters are displayed in the web interface:
• Source VLAN – A VLAN whose traffic will be monitored.
(Range: 1-4093)
• Target Port – The destination port that receives the mirrored traffic from the source
VLAN. (SSE-G2252/P: 1-52)
Web Interface
To configure VLAN mirroring:
1. Click VLAN > M
2. Select A
DD
3. Select the source VLAN, and select a target port.
4. Click A
PPLY
To show the VLANs to be mirrored:
1. Click VLAN > M
2. Select S
HOW
.
IRROR
from the Action list.
.
Figure 7-22. Configuring VLAN Mirroring
.
IRROR
from the Action list.
Figure 7-23. Showing the VLANs to Mirror
7-28