Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#lldp basic-tlv system-name
SSE-G2252(config-if)#
lldp dot1-tlv proto-ident
This command configures an LLDP-enabled port to advertise the supported protocols.
Use the no form to disable this feature.
Syntax
dot1-tlv proto-ident
[no] lldp
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises the protocols that are accessible through this interface.
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#no lldp dot1-tlv proto-ident
SSE-G2252(config-if)#
Chapter 39: LLDP Commands
39-11