Supermicro SSE-G2252 User Manual page 965

• One or more class maps can be assigned to a policy map
page 37-6). The policy map is then bound by a service policy to an interface
(page 37-17). A service policy defines packet classification, service tagging, and
bandwidth policing. Once a policy map has been bound to an interface, no
additional class maps may be added to the policy map, nor any changes made to
the assigned class maps with the
Example
This example creates a class map call "rd-class," and sets it to match packets marked
for DSCP service value 3:
SSE-G2252(config)#class-map rd-class match-any
SSE-G2252(config-cmap)#match ip dscp 3
SSE-G2252(config-cmap)#
Related Commands
"show class-map" on page 37-18
description
This command specifies the description of a class map or policy map.
Syntax
description string
string - Description of the class map or policy map.
(Range: 1-64 characters)
Command Mode
Class Map Configuration
Policy Map Configuration
Example
SSE-G2252(config)#class-map rd-class#1
SSE-G2252(config-cmap)#description matches packets marked for DSCP service
value 3
SSE-G2252(config-cmap)#
Chapter 37: Quality of Service Commands
match or set commands.
37-3
("policy-map" on