ip dhcp restart client
This command submits a BOOTP or DHCP client request.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
•
This command issues a BOOTP or DHCP client request for any IP interface that has
been set to BOOTP or DHCP mode through the
•
DHCP requires the server to reassign the client's last address if available.
•
If the BOOTP or DHCP server has been moved to a different domain, the network
portion of the address provided to the client will be based on this new domain.
Example
In the following example, the device is reassigned the same address.
SSE-G2252(config)#interface vlan 1
SSE-G2252(config-if)#ip address dhcp
SSE-G2252(config-if)#exit
SSE-G2252#ip dhcp restart client
SSE-G2252#show ip interface
Vlan 1 is Administrative Up - Link Up
Address is 12-34-12-34-12-34 (bia 12-34-12-34-12-34)
Index: 1001, MTU: 1500, Bandwidth: 1g
Address Mode is DHCP
IP Address: 192.168.0.9 Mask: 255.255.255.0
SSE-G2252#
Related Commands
"ip address" on page 42-2
Chapter 41: DHCP Commands
ip address
41-3
command.