Command Mode
Normal Exec, Privileged Exec
Example
SSE-G2252#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join Timer:
Leave Timer:
Leaveall Timer: 1000 centiseconds
SSE-G2252#
Related Commands
"garp timer" on page 35-3
show gvrp configuration
This command shows if GVRP is enabled.
Syntax
show gvrp configuration [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-12)
Default Setting
Shows both global and interface-specific configuration.
Command Mode
Normal Exec, Privileged Exec
Example
SSE-G2252#show gvrp configuration ethernet 1/7
Eth 1/ 7:
GVRP Configuration : Disabled
SSE-G2252#
20 centiseconds
60 centiseconds
Chapter 35: VLAN Commands
35-7