Switchport Acceptable-Frame-Types - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual

switchport acceptable-frame-types

This command configures the acceptable frame types for a port. Use the no form to
restore the default.
Syntax
switchport acceptable-frame-types {all | tagged}
no switchport acceptable-frame-types
all - The port accepts all frames, tagged or untagged.
tagged - The port only receives tagged frames.
Default Setting
All frame types
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
When set to receive all frame types, any received frames that are untagged are
assigned to the default VLAN.
Example
The following example shows how to restrict the traffic received on port 1 to tagged
frames:
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#switchport acceptable-frame-types tagged
SSE-G2252(config-if)#
Related Commands
"switchport mode" on page 35-14
35-12