Snmp-Server Enable Port-Traps Atc Broadcast-Alarm-Fire - Supermicro SSE-G2252 User Manual

snmp-server enable port-traps atc
broadcast-alarm-fire
This command sends a trap when broadcast traffic exceeds the upper threshold for
automatic storm control. Use the no form to disable this trap.
Syntax
[no] snmp-server enable port-traps atc broadcast-alarm-fire
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#snmp-server enable port-traps atc
broadcast-alarm-fire
SSE-G2252(config-if)#
Related Commands
"auto-traffic-control alarm-fire-threshold" on page 32-7
Chapter 32: Automatic Traffic Control Commands
32-11