Show Mvr - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual

show mvr

This command shows information about the global MVR configuration settings when
entered without any keywords, the interfaces attached to the MVR VLAN using the
interface keyword, or the multicast groups assigned to the MVR VLAN using the
members keyword.
Syntax
show mvr [interface [interface] | members [ip-address]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-12)
ip-address - IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
Default Setting
Displays global configuration settings for MVR when no keywords are used.
Command Mode
Privileged Exec
Command Usage
Enter this command without any keywords to display the global settings for MVR. Use
the interface keyword to display information about interfaces attached to the MVR
VLAN. Or use the members keyword to display information about multicast groups
assigned to the MVR VLAN.
Example
The following shows the global MVR settings:
SSE-G2252#show mvr
MVR Config Status
MVR Running Status
MVR Multicast VLAN
MVR Group Address
MVR Group Count
SSE-G2252#
: Enabled
: Active
: 1
: 225.0.0.5
: 10
38-40