Chapter 34 Spanning Tree Commands - Supermicro SSE-G2252 User Manual

Spanning Tree Commands
This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected interface.
Command
spanning-tree
spanning-tree cisco-prestandard
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree mode
spanning-tree pathcost method
spanning-tree priority
spanning-tree mst configuration
spanning-tree transmission-limit
max-hops
mst priority
mst vlan
name
revision
spanning-tree bpdu-filter
spanning-tree bpdu-guard
spanning-tree cost
spanning-tree edge-port
spanning-tree link-type
spanning-tree loopback-detection
spanning-tree loopback-detection
release-mode
spanning-tree loopback-detection
trap
spanning-tree mst cost
spanning-tree mst port-priority
spanning-tree port-priority
Chapter 34
Table 34-1. Spanning Tree Commands
Function
Enables the spanning tree protocol
Configures spanning tree operation to be compatible with
Cisco prestandard versions
Configures the spanning tree bridge forward time
Configures the spanning tree bridge hello time
Configures the spanning tree bridge maximum age
Configures STP, RSTP or MSTP mode
Configures the path cost method for RSTP/MSTP
Configures the spanning tree bridge priority
Changes to MSTP configuration mode
Configures the transmission limit for RSTP/MSTP
Configures the maximum number of hops allowed in the
region before a BPDU is discarded
Configures the priority of a spanning tree instance
Adds VLANs to a spanning tree instance
Configures the name for the multiple spanning tree
Configures the revision number for the multiple spanning
tree
Filters BPDUs for edge ports
Shuts down an edge port if it receives a BPDU
Configures the spanning tree path cost of an interface
Enables fast forwarding for edge ports
Configures the link type for RSTP/MSTP
Enables BPDU loopback detection for a port
Configures loopback release mode for a port
Enables BPDU loopback SNMP trap notification for a
port
Configures the path cost of an instance in the MST
Configures the priority of an instance in the MST
Configures the spanning tree priority of an interface
Chapter 34: Spanning Tree Commands
34-1
Mode
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
MST
MST
MST
MST
MST
IC
IC
IC
IC
IC
IC
IC
IC
IC
IC
IC