Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Refer to
Section 21-3: "Frame Size" on page 21-12
maximum frame size for this switch.
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#lldp dot3-tlv max-frame
SSE-G2252(config-if)#
lldp dot3-tlv poe
This command configures an LLDP-enabled port to advertise its Power-over-Ethernet
(PoE) capabilities. Use the no form to disable this feature.
Syntax
[no] lldp dot3-tlv poe
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises Power-over-Ethernet capabilities, including whether or not PoE is
supported, currently enabled, if the port pins through which power is delivered can be
controlled, the port pins selected to deliver power, and the power class.
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#lldp dot3-tlv poe
SSE-G2252(config-if)#
Chapter 39: LLDP Commands
for information on configuring the
39-15