Supermicro SSE-G2252 User Manual page 179

3. Select a port or trunk configure.
4. Modify the settings for any interface as required.
5. Click A .
PPLY
Figure 7-5. Configuring Static VLAN Members by Interface
To configure static members by interface range:
1. Click VLAN > S
2. Select E M
DIT EMBER BY
3. Set the Interface type to display as P
4. Enter an interface range.
5. Modify the VLAN parameters as required. Remember that the PVID, acceptable
frame type, and ingress filtering parameters for each interface within the specified
range must be configured on either the E
I page.
NTERFACE
6. Click A .
PPLY
Figure 7-6. Configuring Static VLAN Members by Interface Range
.
TATIC
I
NTERFACE
Chapter 7: VLAN Configuration
R from the Action list.
ANGE
or T .
ORT RUNK
M
DIT EMBER BY
7-9
VLAN or E M
DIT EMBER BY