revision
This command configures the revision number for this multiple spanning tree
configuration of this switch. Use the no form to restore the default.
Syntax
revision number
number - Revision number of the spanning tree. (Range: 0-65535)
Default Setting
0
Command Mode
MST Configuration
Command Usage
The MST region name
designate a unique MST region. A bridge (i.e., spanning-tree compliant device such as
this switch) can only belong to one MST region. And all bridges in the same region must
be configured with the same MST instances.
Example
SSE-G2252(config-mstp)#revision 1
SSE-G2252(config-mstp)#
Related Commands
"name" on page 34-14
("name" on page
34-14) and revision number are used to
34-15
Chapter 34: Spanning Tree Commands