SSE-G2252/SSE-G2252P Switches User's Manual
•
Login Attempts – Configures the amount of times a supplicant may attempt and fail
authentication before it must wait the configured quiet period. (Range: 1-3 attempts;
Default: 3 attempts)
Web Interface
To configure global parameters for web authentication:
1. Click S
ECURITY
2. Select C
ONFIGURE
3. Enable web authentication globally on the switch, and adjust any of the protocol
parameters as required.
4. Click A
PPLY
Figure 14-20. Configuring Global Settings for Web Authentication
> W
A
EB
UTHENTICATION
G
from the Step list.
LOBAL
.
14-20