SSE-G2252/SSE-G2252P Switches User's Manual
Example
The following example clears statistics on port 5.
SSE-G2252#clear counters ethernet 1/5
SSE-G2252#
show interfaces counters
This command displays interface statistics.
Syntax
show interfaces counters [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-12)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a description of
the items displayed by this command, see
page
6-13.
Example
SSE-G2252#show interfaces counters ethernet 1/17
Ethernet 1/ 17
===== IF table Stats =====
===== Extended Iftable Stats =====
2166458 Octets Input
14734059 Octets Output
14707 Unicast Input
19806 Unicast Output
0 Discard Input
0 Discard Output
0 Error Input
0 Error Output
0 Unknown Protos Input
0 QLen Output
23 Multi-cast Input
"Showing Port or Trunk Statistics" on
27-14