Supermicro SSE-G2252 User Manual page 429

• Falling Event Index – The index of the event to use if an alarm is triggered by
monitored variables reaching or crossing below the falling threshold. If there is no
corresponding entry in the event control table, then no event will be generated.
(Range: 0-65535)
• Owner – Name of the person who created this entry. (Range: 1-127 characters)
Web Interface
To configure an RMON alarm:
1. Click A
DMINISTRATION
2. Select C
ONFIGURE
3. Select A from the A
DD
4. Click A .
LARM
5. Enter an index number, the MIB object to be polled (etherStatsEntry.n.n), the polling
interval, the sample type, the thresholds, and the event to trigger.
6. Click A
PPLY
Figure 15-39. Configuring an RMON Alarm
To show configured RMON alarms:
1. Click A
DMINISTRATION
2. Select C
ONFIGURE
3. Select S from the A
HOW
4. Click A .
LARM
Chapter 15: Basic Administration Protocols
> RMON.
G from the S
LOBAL TEP
list.
CTION
> RMON.
G from the S
LOBAL TEP
list.
CTION
15-55
list.
list.