SSE-G2252/SSE-G2252P Switches User's Manual
show bridge-ext
This command shows the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See
Section 5-4: "Displaying Bridge Extension Capabilities" on page 5-4
description of the displayed items.
Example
SSE-G2252#show bridge-ext
Maximum Supported VLAN Numbers
Maximum Supported VLAN ID
Extended Multicast Filtering Services : No
Static Entry Individual Port
VLAN Learning
Configurable PVID Tagging
Local VLAN Capable
Traffic Classes
Global GVRP Status
GMRP
SSE-G2252#
show garp timer
This command shows the GARP timers for the selected interface.
Syntax
show garp timer [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-12)
Default Setting
Shows all GARP timers.
: 256
: 4093
: Yes
: IVL
: Yes
: No
: Enabled
: Disabled
: Disabled
35-6
for a