Supermicro SSE-G2252 User Manual page 160

SSE-G2252/SSE-G2252P Switches User's Manual
Table 6-3. LACP Internal Configuration Information (Continued)
Parameter
LACPDUs Interval
Admin State,
Oper State
Web Interface
To display LACP settings and status for the local side:
1. Click I
NTERFACE
2. Select C
ONFIGURE
3. Select S
HOW
4. Click I
NTERNAL
5. Select a group member from the Port list.
Description
Number of seconds before invalidating received LACPDU information.
Administrative or operational values of the actor's state parameters:
Expired – The actor's receive machine is in the expired state;
Defaulted – The actor's receive machine is using defaulted operational partner
information, administratively configured for the partner.
Distributing – If false, distribution of outgoing frames on this link is disabled;
i.e., distribution is currently disabled and is not expected to be enabled in the
absence of administrative changes or changes in received protocol
information.
Collecting – Collection of incoming frames on this link is enabled; i.e.,
collection is currently enabled and is not expected to be disabled in the
absence of administrative changes or changes in received protocol
information.
Synchronization – The System considers this link to be IN_SYNC; i.e., it has
been allocated to the correct Link Aggregation Group, the group has been
associated with a compatible Aggregator, and the identity of the Link
Aggregation Group is consistent with the System ID and operational Key
information transmitted.
Aggregation – The system considers this link to be aggregatable; i.e., a
potential candidate for aggregation.
Long timeout – Periodic transmission of LACPDUs uses a slow transmission
rate.
LACP-Activity – Activity control value with regard to this link.
(0: Passive; 1: Active)
> T > D
RUNK YNAMIC
A
GGREGATION
I from the Action list.
NFORMATION
.
.
P from the Step list.
ORT
6-30