Switchport Gvrp - Supermicro SSE-G2252 User Manual

switchport gvrp

This command enables GVRP for a port. Use the no form to disable it.
Syntax
[no] switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
GVRP cannot be enabled for ports set to Access mode using the
command.
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#switchport gvrp
SSE-G2252(config-if)#
Chapter 35: VLAN Commands
35-5
switchport mode