SSE-G2252/SSE-G2252P Switches User's Manual
Example
SSE-G2252(config)#lldp holdtime-multiplier 10
SSE-G2252(config)#
lldp med-fast-start-count
This command specifies the amount of MED Fast Start LLDPDUs to transmit during the
activation process of the LLDP-MED Fast Start mechanism.
Syntax
lldp med-fast-start-count packets
seconds - Amount of packets. (Range: 1-10 packets; Default: 4 packets)
Default Setting
4 packets
Command Mode
Global Configuration
Command Usage
This parameter is part of the timer which ensures that the LLDP-MED Fast Start
mechanism is active for the port. LLDP-MED Fast Start is critical to the timely startup of
LLDP, and therefore integral to the rapid availability of Emergency Call Service.
Example
SSE-G2252(config)#lldp med-fast-start-count 6
SSE-G2252(config)#
lldp notification-interval
This command configures the allowed interval for sending SNMP notifications about
LLDP MIB changes. Use the no form to restore the default setting.
Syntax
lldp notification-interval seconds
no lldp notification-interval
seconds - Specifies the periodic interval at which SNMP notifications are sent.
(Range: 5 - 3600 seconds)
Default Setting
5 seconds
39-4