Lldp Basic-Tlv Management-Ip-Address; Lldp Basic-Tlv Port-Description - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual

lldp basic-tlv management-ip-address

This command configures an LLDP-enabled port to advertise the management address
for this device. Use the no form to disable this feature.
Syntax
[no] lldp basic-tlv management-ip-address
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• The management address protocol packet includes the IPv4 address of the switch.
If no management address is available, the address should be the MAC address for
the CPU or for the port sending this advertisement.
• The management address TLV may also include information about the specific
interface associated with this address, and an object identifier indicating the type of
hardware component or protocol entity associated with this address. The interface
number and OID are included to assist SNMP applications to perform network
discovery by indicating enterprise specific or other starting points for the search,
such as the Interface or Entity MIB.
• Since there are typically a number of different addresses associated with a Layer 3
device, an individual LLDP PDU may contain more than one management address
TLV.
• Every management address TLV that reports an address that is accessible on a port
and protocol VLAN through the particular port should be accompanied by a port and
protocol VLAN TLV that indicates the VLAN identifier (VID) associated with the
management address reported by this TLV.
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#lldp basic-tlv management-ip-address
SSE-G2252(config-if)#

lldp basic-tlv port-description

This command configures an LLDP-enabled port to advertise its port description. Use
the no form to disable this feature.
39-8