Show Ipv6 Neighbors - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual

show ipv6 neighbors

This command displays information in the IPv6 neighbor discovery cache.
Syntax
show ipv6 neighbors [vlan vlan-id | ipv6-address]
vlan-id - VLAN ID (Range: 1-4093)
ipv6-address - The IPv6 address of a neighbor device. You can specify either a
link-local or global unicast address formatted according to RFC 2373 "IPv6
Addressing Architecture," using 8 colon-separated 16-bit hexadecimal values. One
double colon may be used in the address to indicate the appropriate number of
zeros required to fill the undefined fields.
Default Setting
All IPv6 neighbor discovery cache entries are displayed.
Command Mode
Privileged Exec
Example
The following shows all known IPv6 neighbors for this switch:
SSE-G2252#show ipv6 neighbors
IPv6 Address
2009:DB9:2229::79
FE80::200:E8FF:FE90:0
SSE-G2252#
Table 42-8. show ipv6 neighbors - Display Description
Field
IPv6 Address
Age
Link-layer Addr
Age
666
671
Description
IPv6 address of neighbor
The time since the address was verified as reachable (in seconds). A static entry
is indicated by the value "Permanent."
Physical layer MAC address.
Link-layer Addr
00-00-E8-90-00-00
00-00-E8-90-00-00
42-30
State VLAN
REACH 1
REACH 1