Lldp Basic-Tlv System-Description; Lldp Basic-Tlv System-Name - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual

lldp basic-tlv system-description

This command configures an LLDP-enabled port to advertise the system description.
Use the no form to disable this feature.
Syntax
[no] lldp basic-tlv system-description
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The system description is taken from the sysDescr object in RFC 3418, which includes
the full name and version identification of the system's hardware type, software
operating system, and networking software.
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#lldp basic-tlv system-description
SSE-G2252(config-if)#

lldp basic-tlv system-name

This command configures an LLDP-enabled port to advertise the system name. Use the
no form to disable this feature.
Syntax
[no] lldp basic-tlv system-name
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The system name is taken from the sysName object in RFC 3418, which contains the
system's administratively assigned name, and is in turn based on the
command.
39-10
hostname