Switchport Voice Vlan Security - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual

switchport voice vlan security

This command enables security filtering for VoIP traffic on a port. Use the no form to
disable filtering on a port.
Syntax
[no] switchport voice vlan security
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
• Security filtering discards any non-VoIP packets received on the port that are tagged
with the voice VLAN ID. VoIP traffic is identified by source MAC addresses
configured in the Telephony OUI list, or through LLDP that discovers VoIP devices
attached to the switch. Packets received from non-VoIP sources are dropped.
• When enabled, be sure the MAC address ranges for VoIP devices are configured in
the Telephony OUI list
Example
The following example enables security filtering on port 1.
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#switchport voice vlan security
SSE-G2252(config-if)#
(voice vlan mac-address).
35-42