CLI References
See
"mvr vlan group" on page 38-39
Parameters
These parameters are displayed in the web interface:
•
Port – Port identifier.
•
VLAN – VLAN identifier
•
Group IP Address – Defines a multicast service sent to the selected port. Multicast
groups must be assigned from the MVR group range configured on the C
G
page.
ENERAL
Web Interface
To assign a static MVR group to a port:
1. Click M
ULTICAST
2. Select C
ONFIGURE
3. Select A
from the A
DD
4. Select a VLAN and port member to receive the multicast stream, and then enter the
multicast group address.
5. Click A
.
PPLY
Figure 18-21. Assigning Static MVR Groups to a Port
To show the static MVR groups assigned to a port:
1. Click M
ULTICAST
2. Select C
ONFIGURE
3. Select S
from the A
HOW
4. Select the port for which to display this information.
for CLI reference information.
> MVR.
S
G
M
TATIC
ROUP
EMBER
list.
CTION
> MVR.
S
G
M
TATIC
ROUP
EMBER
list.
CTION
18-29
Chapter 18: Multicast Filtering
from the S
list.
TEP
from the S
list.
TEP
ONFIGURE