Supermicro SSE-G2252 User Manual page 349

Web Interface
To set the maximum number of addresses which can be learned on a port:
1. Click S
ECURITY
2. If port security is enabled on the selected port, first clear the check box in S
S column to disable security.
TATUS
3. Set the maximum number of MAC addresses allowed on the port.
4. Click A .
PPLY
Figure 14-52. Setting the Maximum Address Count for Port Security
To enable port security:
1. Click S
ECURITY
2. Set the action to take when an invalid address is detected on a port.
3. Mark the check box in the S
4. Click A .
PPLY
> P S .
ORT ECURITY
> P S .
ORT ECURITY
ECURITY
Chapter 14: Security Measures
S column to enable security.
TATUS
14-71
ECURITY