Switchport Voice Vlan Priority - Supermicro SSE-G2252 User Manual

SSE-G2252/SSE-G2252P Switches User's Manual

switchport voice vlan priority

This command specifies a CoS priority for VoIP traffic on a port. Use the no form to
restore the default priority on a port.
Syntax
switchport voice vlan priority priority-value
no switchport voice vlan priority
priority-value - The CoS priority value. (Range: 0-6)
Default Setting
6
Command Mode
Interface Configuration
Command Usage
Specifies a CoS priority to apply to the port VoIP traffic on the Voice VLAN. The priority
of any received VoIP packet is overwritten with the new priority when the Voice VLAN
feature is active for the port.
Example
The following example sets the CoS priority to 5 on port 1.
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#switchport voice vlan priority 5
SSE-G2252(config-if)#
35-40