SSE-G2252/SSE-G2252P Switches User's Manual
•
Store – Writes all dynamically learned snooping entries to flash memory. This
function can be used to store the currently learned dynamic DHCP snooping entries
to flash memory. These entries will be restored to the snooping table when the
switch is reset. However, note that the lease time shown for a dynamic entry that
has been restored from flash memory will no longer be valid.
•
Clear – Removes all dynamically learned snooping entries from flash memory.
Web Interface
To display the binding table for DHCP Snooping:
1. Click S
ECURITY
2. Select S
HOW
3. Use the S
TORE
Figure 14-67. Displaying the Binding Table for DHCP Snooping
> DHCP S
NOOPING
I
from the Step list.
NFORMATION
or C
function if required.
LEAR
.
14-96