Chapter 40 Domain Name Service Commands - Supermicro SSE-G2252 User Manual

Domain Name Service Commands
These commands are used to configure Domain Naming System (DNS) services.
Entries can be manually configured in the DNS domain name to IP address mapping
table, default domain names configured, or one or more name servers specified to use
for domain name to address translation.
Note that domain name services will not be enabled until at least one name server is
specified with the
domain-lookup
Command
ip domain-list
ip domain-lookup
ip domain-name
ip host
ip name-server
ipv6 host
clear dns cache
clear host
show dns
show dns cache
show hosts
Chapter 40: Domain Name Service Commands
Chapter 40
ip name-server command and domain lookup is enabled with the
command.
Table 40-1. Address Table Commands
Function
Defines a list of default domain names for incomplete host
names
Enables DNS-based host name-to-address translation
Defines a default domain name for incomplete host names
Creates a static IPv4 host name-to-address mapping
Specifies the address of one or more name servers to use for
host name-to-address translation
Creates a static IPv6 host name-to-address mapping
Clears all entries from the DNS cache
Deletes entries from the host name-to-address table
Displays the configuration for DNS services
Displays entries in the DNS cache
Displays the host name-to-address mapping table
40-1
ip
Mode
GC
GC
GC
GC
GC
GC
PE
PE
PE
PE
PE