SSE-G2252/SSE-G2252P Switches User's Manual
auto-traffic-control auto-control-release
This command automatically releases a control response of rate-limiting after the time
specified in the
Syntax
auto-traffic-control {broadcast | multicast}
auto-control-release
broadcast - Specifies automatic storm control for broadcast traffic.
multicast - Specifies automatic storm control for multicast traffic.
Command Mode
Interface Configuration (Ethernet)
Command Usage
•
This command can be used to automatically stop a control response of rate-limiting
after the specified action has been triggered and the release timer has expired.
•
To release a control response which has shut down a port after the specified action
has been triggered and the release timer has expired, use the
control-release
Example
SSE-G2252(config)#interface ethernet 1/1
SSE-G2252(config-if)#auto-traffic-control broadcast auto-control-release
SSE-G2252(config-if)#
auto-traffic-control release-timer
command.
command has expired.
32-8
auto-traffic-control