SSE-G2252/SSE-G2252P Switches User's Manual
35-2 Editing VLAN Groups
Table 35-3. Commands for Editing VLAN Groups
Command
vlan database
vlan
vlan database
This command enters VLAN database mode. All commands in this mode will take effect
immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
•
Use the VLAN database command mode to add, change, and delete VLANs. After
finishing configuration changes, you can display the VLAN settings by entering the
show vlan
command.
•
Use the
interface vlan
add or remove ports from a VLAN. The results of these commands are written to the
running-configuration file, and you can display this file by entering the
running-config
Example
SSE-G2252(config)#vlan database
SSE-G2252(config-vlan)#
Related Commands
"show vlan" on page 35-18
Function
Enters VLAN database mode to add, change, and delete
VLANs
Configures a VLAN, including VID, name and state
command mode to define the port membership mode and
command.
35-8
Mode
GC
VC
show