SSE-G2252/SSE-G2252P Switches User's Manual
•
Remote Power Pair Controlable – Indicates whether the pair selection can be
controlled for sourcing power on the given port associated with the remote system.
•
Remote Power Classification – This classification is used to tag different terminals
on the Power over LAN network according to their power consumption. Devices
such as IP telephones, WLAN access points and others, will be classified according
to their power requirements.
Port Details – 802.3 Extension Trunk Information
•
Remote Link Aggregation Capable – Shows if the remote port is not in link
aggregation state and/or it does not support link aggregation.
•
Remote Link Aggregation Status – The current aggregation status of the link.
•
Remote Link Port ID – This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of
the ifIndex for the port component associated with the remote system. If the remote
port is not in link aggregation state and/or it does not support link aggregation, this
value should be zero.
Port Details – 802.3 Extension Frame Information
•
Remote Max Frame Size – An integer value indicating the maximum supported
frame size in octets on the port component associated with the remote system.
Web Interface
To display LLDP information for a remote port:
1. Click A
DMINISTRATION
2. Select S
HOW
3. Select P
ORT
Figure 15-13. Displaying Remote Device Information for LLDP (Port)
> LLDP.
R
D
I
EMOTE
EVICE
NFORMATION
, P
D
, T
ORT
ETAILS
RUNK
from the S
TEP
, or T
D
.
RUNK
ETAILS
15-22
list.