Rescale Floor; Reset Floor Alignment Point; Draw New Partitions - Extreme Networks Summit WMScanner User Manual

Model Building

Rescale Floor

The Rescale Floor button allows you to set the scale for the floor you have chosen to edit from the
Building Floor Manager's main dialog. The scaling command will resize all entities within the floor.
You will be prompted to select two points in the drawing (by clicking with the mouse) and then you
will be prompted to enter the actual physical real world distance between the two locations. The
appropriate scaling will be applied so that the distance between the points within the drawing matches
the value you enter.
See "Snap to Endpoint" on page 183
accurately.

Reset Floor Alignment Point

The Reset Floor Alignment Point button allows you to choose the location that you wish to be the origin
of the x-y plane of the top down perspective of the floor. The point you choose to be the origin is also
the point within the drawing that will be used to align this floor with floors above and below it.
See "Snap to Endpoint" on page 183
accurately.

Draw New Partitions

The Draw New Partitions button allows you to draw new walls to the floor you have chosen to edit.
Press the Draw New Partitions button to be taken to the Draw Partition dialog box detailed in section
"Drawing Partitions" on page
square room, and delete partitions.
182
for information on how to select your scaling points more
for information on making your origin point selection more
196. With the Draw Partition dialog box, you draw individual partitions, a
Summit WMScanner Users Guide